BORETTI BR178 Instrukcja Użytkownika Pobierz pdf (Strona 23)

Electrical connection

Before plugging in, ensure that the voltage

and frequency shown on the rating plate cor-

respond to your domestic power supply.

The appliance must be earthed. The power

supply cable plug is provided with a contact

for this purpose. If the domestic power sup-

ply socket is not earthed, connect the appli-

ance to a separate earth in compliance with

current regulations, consulting a qualified

electrician.

The manufacturer declines all responsibility

if the above safety precautions are not ob-

served.

This appliance complies with the E.E.C. Di-

rectives.

Removing the shelf holders

Your appliance is equipped with shelf retain-

ers that make it possible to secure the

shelves during transportation.

To remove them proceed as follows:

1. Move the shelf holders in the direction of

the arrow (A).

2. Raise the shelf from the rear and push it

forward until it is freed (B).

3. Remove the retainers (C).

Door reversibility

The door of the appliance opens to the

right. If you want to open the door to the

left, follow these steps before you install the

appliance:

1. Loosen and remove the upper pin.

2. Remove the door.

3. Remove the spacer.

4. With a key, loosen the lower pin.

On the opposite side:

1. Tighten the lower pin.

2. Install the spacer.

3. Install the door.

4. Tighten the upper pin.

Ventilation requirements

The airflow behind the appliance must be

sufficient.

23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Komentarze do niniejszej Instrukcji

Brak uwag